ADTRAN 1200051L6 - Manual (Page 146)

Appendix F: Ordering ISDN Without IOCs
132 ISU 2x64 Dual Port ISDN Service Unit User Manual 61200051L1-1D
DMS-100 Protocol Version 1 Line Additional Parameters
The Northern Telecom DMS-100 telephone switch supports a
proprietary ISDN D-channel call control protocol called Pvc1
which is based on CCITT recommendations. The ISU 2x64 con-
figured for switch-type DMS-100 is functional on lines providing
this protocol on DMS-100 switches with software version BCS-32
or later. The ISU 2x64 supports the following configurations on
DMS-100 lines:
• Multipoint with one phone number (1B+D service)
• Multipoint with two phone numbers (for 2B+D service)
The requirements for the DMS-100 multipoint line are defined in
the sections Local Interface, Local Service, and in Table F-B, all in
this appendix. The line should have two service profiles with the
following parameters to support BONDING.
Table F-B
DMS Features
Line type Basic Rate, Functional
Electronic key telephone set (EKTS) No
Call appearance handling (CACH) No
Initializing terminal Yes
Bearer service Circuit Switched Voice and Data permitted.
Packet mode data not permitted.
Circuit switched service Yes
Packet switched service No
Protocol Version Functional PVC 1
TEI Dynamic