Kenwood K-731-B - Manual (Page 46)

46 R-K731
Playback from External Components
This section explains how to connect external components to the system and play back tracks.
External Components
Connect the external component to the system as described in Other Accessories (Commercially Available Units)> (P.12, 13).
z When connecting external components, always turn this system and the external com-
ponents off beforehand.
z Also refer to the instruction manual that comes with the external component being
connected.
1 1
3 3
Adjust the volume level.
Press the [D-IN1/2] key to perform playback from a device
connected to the [DIGITAL IN] terminal, while you press the
[AUX] key to perform playback from a device connected to
the [AUX PLAY IN] terminal.
2 2
Begin playback on the connected external component.
Perform the required operation on the connected external component to start
playback.
z When a digital component is
selected, the input signal sam-
pling frequency is displayed.
z The system will play PCM
(32, 44.1, 48, 88.2, 96 kHz)
digital signals.
R-K731_E.indb 46 R-K731_E.indb 46 2011/10/07 14:08:47 2011/10/07 14:08:47