Kenwood K-731-B - Manual (Page 34)

34 R-K731
Playing Back from a USB Device
This section explains how to connect a USB fl ash memory or USB mass storage class compliant digital
audio player ("USB device") and play back audio fi les from it.
USB
Connect a USB device to the [USB ] connector on the
front panel of the main unit.
1 1
Connect a USB fl ash memory or USB mass storage class compliant digital au-
dio player to the USB connector and play back audio fi les from it.
z Also refer to the instruction manual that comes with the USB device you are connecting.
z Supported Files
WAV
MP3
WMA
AAC
See for details. (P.23, 24)
Press the [USBE] key to begin playback.
z Simply pressing the [USBE] key turns on the system and begins playback.
z After folders or fi les are searched, playback begins with the smallest fi le number.
See P.28 for information on the playback sequence when there are multiple fold-
ers or fi les on the connected device.
2 2
z If no playable fi les are found, playback does not start.
z When playback resumes on a digital HDD audio player, sound may jump due to
the mechanism specifi c to HDD.
z The Resume function is cancelled if you switch to another input source during
playback.
z When you connect/disconnect a USB device, make sure the system is not per-
forming any operation or that the power is turned off .
R-K731_E.indb 34 R-K731_E.indb 34 2011/10/07 14:08:43 2011/10/07 14:08:43