Kenwood K-731-B - Manual (Page 37)

USB
37 English
Press the [USBE] key to begin playback.
5 5
z If you turn the system off , switch to another input source or remove the
USB device for which program playback is set, the information in the
specifi ed program is erased.
To select two or more tracks, repeat steps 1- 2 to 3.
z You can select up to 30 tracks. If you attempt to select more tracks, the
“Program Full” message is displayed.
4 4
„ To cancel program mode
Stop playback and press the [P.MODE] key so that "PGM" is no lon-
ger displayed.
„ To remove a track from a program
Stop playback and then press the [CLEAR] key. Each time you press
the key, the last programmed track is cleared.
„ To add a track to the end of the program
If you are already playing an audio fi le, stop playback and carry out
steps 1-
2 to 3.
R-K731_E_04.indd 37 R-K731_E_04.indd 37 2011/10/26 10:00:14 2011/10/26 10:00:14