Kenwood K-731-B - Manual (Page 31)

CD
• RPage XX
• RPage XX
English
Related
Information
CD
31 English
Related
Information
z CD Repeat Playback ModeR P.29
Press the [CDE] key to begin playback.
5 5
Press the [A ] or [B ] key to select the track or fi le you
want to listen to.
2 2
CD
When Track 10 is selected as
program track 1.
z If you turn the system off , switch to another input source or remove the
CD for which program playback is set, the information in the specifi ed
program is erased.
When folder number 5 and fi le number 58 are
selected.
MP3/WMA/AAC
Related
Information
To select two or more tracks, repeat steps 2 and 3
( CD ), or steps 1- 2 to 3 ( MP3/WMA/AAC ).
z You can select up to 30 tracks. If you attempt to select more tracks, the
“Program Full” message is displayed.
4 4
z You can also use number keys to select the fi le.
z If you enter the wrong information, press the [CLEAR] key before you
proceed to step 3. Then enter the information again.
z Proceed to step 3 within 20 seconds after selecting a track or fi le.
Press the [ENTER] key.
3 3
„ To cancel program mode
Stop playback and press the [P.MODE] key so that "PGM" is no lon-
ger displayed.
„ To remove a track from a program
Stop playback and then press the [CLEAR] key. Each time you press
the key, the last programmed track is cleared.
„ To add a track to the end of the program
If you are already playing a CD, stop playback and carry out steps 2
and 3 (
CD ) or steps 1- 2 to 3 ( MP3/WMA/AAC ).
R-K731_E_03.indd 31 R-K731_E_03.indd 31 2011/10/26 9:59:20 2011/10/26 9:59:20