How to play media, Ow to play media – Kenwood DNX9210BT User Manual
Page 6
10
10
11
H
ow To Play Media
Music CD and disc media
Press the <
0> button.
The panel opens.
Insert the disc into the slot.
The panel closes automatically.
The unit loads the disc and playback
starts.
●
●
To eject the disc:
Press the <
0> button.
USB device
Connect the USB device with the
USB cable.
The unit reads the device and playback
starts.
●
●
To disconnect the device:
Touch [
0] for 1 second on the screen and
disconnect the device from the cable.
iPod
Connect the iPod with the iPod
cable.
The unit reads the iPod and playback
starts.
●
●
To disconnect the device:
Touch [
] on the screen and then touch
[
0] for 1 second. Disconnect the iPod
from the cable.
1
2
1
1
SD card
Press the <0> button for 1
second to open the front panel.
0
The panel fully opens.
NOTE
• For how to detach the panel, see
.
Hold the SD card as the diagram
below and insert it into the slot
until it clicks.
Notched section
Labeled side
The unit loads the card and playback
starts.
●
●
To remove:
Push the SD card until it clicks and then
remove your finger from the card. The
card pops up so that you can pull it out
with your fingers.
1
2