Radio and tv operation, Radio basic operation, Adio and tv operation – Kenwood DNX9210BT User Manual
Page 23
44
44
45
Radio Basic Operation
Most functions can be controlled from the source control screen.
NOTE
• Set the remote controller mode switch to AUD mode before starting operation, see
2
1
3
3
4
4
5
8
6
2
7
Simple Control screen
List Control screen
1 PS/Station name display
Displays the PS name.
2 Information display/Control switching area
Displays the following information.
• [FM1] etc.: Band display
• MHz/kHz: Frequency display
• Preset #: Preset number
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
Touch to switch the multi function menu. For details on the menu, see
4 Preset key/Multi function menu
Recalls the memorized station or channel. When touched for 2 seconds, stores the current receiving
station or channel in memory.
When switched, various functions can be performed by using keys in this area.
For details on the menu, see
5 Sub function key
Touch to display “Sub function menu” (7 in this table).
6 Preset list
Displays the list of preset stations or channels and the information.
R
adio and TV Operation
7 Sub function menu
The following functions can be performed by using keys in this area.
• Switches the band: Touch [AM] or [FM].
• Tunes in a station: Touch [
1] [¡]. The method of frequency switching can be changed. See
.
The bar in center (tuner only) shows the current frequency location.
8 List switching key
Touch to switch between the preset list and the information list.
In tuner mode, radio text plus will be displayed.
Multi function menu
The functions of each key are as follows.
[P1] - [P6]
Selects the preset station. Touch for 2 seconds to store the current station into the preset memory.
[
]
Displays the list of preset stations or channels.
[TI] (FM Tuner only)
Sets the traffic information mode on. For details, see
[SEEK]
Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].
• AUTO1: Tunes in a station with good reception automatically.
• AUTO2: Tunes in stations in memory one after another.
• MANUAL: Switches to the next frequency manually.
[AME]
Selects the auto memory mode. For details, see
[PTY] (FM Tuner only)
Searches a program by setting program type. For details, see
[MONO] (FM Tuner only)
Select the Monaural reception.
[LO.S] (FM Tuner only)
Turns the Local Seek function on or off.
[
SETUP]
Touch to display the SETUP Menu screen. See
.
[
AUDIO]
Touch to display the Audio Control screen. See
.
[
EXT SW]
Touch to control the external device power supply. For details, see
External Device Control (P.80)
.
[ REAR
]
Touch to mute the rear speaker.