Kenwood DNX9210BT - Manual (Page 31)

60 60 61
Return to the Top page
Bluetooth Operation
Return to the Top page
Bluetooth Operation
Operations during a call
Adjust the receiver volume
Press the <
∞> or <5> button.
Switch the voice output
Touch [
] to switch the voice output
between phone and speaker.
Output the dial tone
Touch [DTMF] to display the tone input screen.
You can send tones by touching desired keys
on the screen.
Call waiting
If you receive a call during another call, you
can answer it with the current call suspended
or switch between the current call and
waiting call.
Answer the new incoming call
Touch [ ]. The current call is kept suspended.
Switch between the current and waiting call
Touch [ ] again.
Each time you touch [ ], the calling party is
switched.
Terminate the current call
Touch [
].
The call switches to the waiting one.
Bluetooth Setup
You can register PIN code, select the device
to connect, and perform output setup.
1
Press the button.
Hands Free screen appears.
Touch [BT SETUP].
Bluetooth SETUP screen appears.
See the following section for each setting.
• Register the PIN code (P.61)
• Select the unit to connect (P.56)
• Set up output (P.61)
Registering Bluetooth unit PIN
code
You can set the PIN code to the Bluetooth
unit. The code is acquired when registering
(pairing) from the cell-phone or audio player
side.
1
Touch [SET] of [Receiver PIN Code] in
the Bluetooth SETUP screen.
Receiver PIN Code Set screen appears.
2
Enter a code number and touch
[Enter].
NOTE
• If you want to cancel the registration, touch
[Cancel].
• If you want to clear the entered number, touch
[Clear].
Bluetooth output setup
You can select speakers to output the sound
from cell-phone (such as phone call voice
and ringing tone) and Bluetooth audio
player.
1
Touch [Front Only] or [All] of
[Bluetooth HF/Audio] in the Bluetooth
SETUP screen.
Front Only
Outputs from the front speakers.
All
Outputs from all speakers.
Hands-Free Control
You can perform various setup about hands-
free function.
1
Press the button.
Hands Free screen appears.
2
Touch desired key in the Hands Free
screen.
See the following section for each setting.
• Set up the Hands-Free system (P.62)
• Set up SMS (P.63)
• Preset the phone number (P.65)