2 connecting up the vi-m2, Connecting up the vi-m2, Digital recorder – Videoswitch Vi-M series User Manual

Page 9

Text mode
Original mode

Digital Recorder

1.2

Connecting Up the Vi-M2

For a standard digital recording system you will need

• The

Vi-M2

recorder

• Some cameras with lenses
• A video monitor (with BNC composite video input) or a VGA monitor
• BNC

cables

• Connect the monitor output (M1) of the Vi-M2 to a Video Monitor using a BNC

cable. Alternatively or additionally, connect a VGA monitor to the VGA output

• Make sure that the monitor termination is switched on (i.e. to 75 Ohms)
• On 8-camera models, a spot monitor may also be connected, to output M2.
• Connect a camera to Camera Input 1 on the Vi-M2 using a BNC cable
• Connect further cameras to Inputs 2,3,4 etc
• Make sure that the voltage select switch (if present) is set to suit the mains supply.

The setting required in UK and Europe is normally 230Vac

• Connect the mains power using the mains cable provided