Videoswitch Vi-M series - Manual (Page 31)

Digital Recorder
• Use
the up and down keys to select (block) or deselect (dash) cameras
1.1.1.1.7 Dwell times
A separate auto-sequencing dwell time may be specified for each camera in this part of the
menu.
1.1.1.1.8 Dwell times (all)
An auto-sequencing dwell time may be specified for all cameras. This overrides the above
individual dwell time setting
1.1.1.13 Auto sequence (spot monitor)
The cameras displayed on the spot monitor(s) may be sequenced automatically
1.1.1.1.9 Spot1
1.1.1.1.10 Sequence Mode
Select whether you want random sequencing or normal sequencing.
1.1.1.1.11 Camera List
Specify her which cameras you want to be included in the sequence.
• Use
the left and right keys to move the cursor
• Use
the up and down keys to select (block) or deselect (dash) cameras
1.1.1.1.12 Dwell times
A separate auto-sequencing dwell time may be specified for each camera in this part of the
menu.
1.1.1.1.13 Dwell times (all)
An auto-sequencing dwell time may be specified for all cameras. This overrides the above
individual dwell time setting .
1.1.1.14 Spot monitor options
1.1.1.1.14 Spot1
The spot monitor may be setup to automatically change camera or to change to auto-
sequencing at different times of day.
6.3.1.1.1.1 Weekday spot daytime
Set the blocks on to indicate daytime hours during weekdays.
6.3.1.1.1.2 Weekend spot daytime
Set the blocks on to indicate daytime hours during weekends.
6.3.1.1.1.3 Day spot camera
This is the camera number that the spot monitor will display when the Spot Daytime starts,
or if the unit powers up in the daytime.
6.3.1.1.1.4 Day sequence spot
This option specifies whether the spot monitor will auto-sequence when the Spot Daytime
25