Videoswitch Vi-M series - Manual (Page 32)

Digital Recorder
starts, or if the unit powers up in the daytime.
6.3.1.1.1.5 Night spot camera
This is the camera number that the spot monitor will display when the Spot Daytime ends, or
if the unit powers up in the night-time.
6.3.1.1.1.6 Night sequence spot
This option specifies whether the spot monitor will auto-sequence when the Spot Daytime
ends, or if the unit powers up in the night-time.
1.1.1.15 Power-up options
1.1.1.1.15 Main monitor format
Following power-up the main monitor screen format can be set to Full, Quad, x9 multi-
screen or x16 multi-screen.
6.3.1.1.1.7 Sequence main
Following power-up the main monitor may be set to auto-sequence.
6.3.1.1.1.8 Main camera
Specify the full screen camera that will be displayed on power-up.
6.4 Alarms
1.1.12 Alarm inputs
The following menu items deal with the alarm contact inputs.
1.1.1.16 Alarm polarities
Alarm contacts may be set as normally open or normally closed.
Note that if you select normally closed and nothing is connected to the alarm input, the
system will register an alarm.
1.1.1.17 Camera mapping
Normally Alarm1 maps to Camera 1, Alarm 2 maps to Camera2 etc.
The M-series DVRs support alarm mapping whereby each alarm input may be assigned to
any camera. Some cameras may therefore have multiple alarm inputs associated with them.
1.1.1.18 Alarm timers
The alarms may be programmed to be operative only during particular hours of the day.
These hours may be different for weekdays and weekends.
1.1.1.19 Weekday alarm times
Specify during which hours of each weekday the alarm inputs are active
1.1.1.20 Weekend alarm times
26