Videoswitch Vi-M series - Manual (Page 30)

Digital Recorder
• Use
the left and right keys to move the cursor, and the up and down keys to select
the character.
• Use
DEFAULT to erase the title completely or set back to Videoswitch
• When editing a title on a standard keypad, you can use the Inc and Dec keys to
insert and delete characters
1.1.1.10 Camera Titles
• The
Plus and Minus keys on a standard keypad allow you to select predefined
titles when editing a camera title.
• Use
the left and right keys to move the cursor
• Use
the up and down keys to select the character.
• Use
DEFAULT to erase the title completely or set back to Camera 1, Camera 2 etc.
• When editing a title on a standard keypad, you can use the Inc and Dec keys to
insert and delete characters
1.1.1.11 Show Camera Titles
You can choose how the cameras are identified on the main monitor in the various screen
formats. This can be useful to avoid cluttering the screen too much.
1.1.1.1.1 Full
Select whether you wish to identify the full screen camera by its number, by its title or not at
all. Note that the camera number of the currently selected monitor is always displayed in the
bottom right of the screen.
1.1.1.1.2 Quad
Select whether you wish to identify the QUAD cameras by number, by title or not at all.
1.1.1.1.3 x9
Select whether you wish to identify the 9-way multi-screen cameras by number, by title or
not at all.
1.1.1.1.4 x16
Select whether you wish to identify the 16-way multi-screen cameras by number, by title or
not at all.
1.1.1.12 Auto sequence (main monitor)
The cameras displayed on the main monitor may be sequenced automatically
1.1.1.1.5 Sequence Mode
Select whether you want random sequencing or normal sequencing.
1.1.1.1.6 Camera List
Specify her which cameras you want to be included in the sequence.
• Use
the left and right keys to move the cursor
24