Videoswitch Vi-M series - Manual (Page 36)

Digital Recorder
Enter required gateway. Press DEFAULT for the default setting.
1.1.23 MTU
The MTU may be set if necessary for compatibility with attached routers or computers.
Normally this option is set to zero which indicates automatic mode (press DEFAULT).
6.6 Configuration
1.1.24 Language
Specify the langue you require for the menus.
1.1.25 Unit number
If you wish to address multiple units from a single keyboard, make sure each DVR has a
different unit number. If multiple DVRS are cascaded, there must have unit number 1,2,3
etc.
1.1.26 Display
1.1.1.30 VGA resolution
If a VGA monitor is connected, set its native resolution here.
1.1.1.31 VGA gamma
Adjust this setting to get the best image
1.1.1.32 VGA motion
Adjust this setting to get the best image
1.1.1.33 Menu translucency
Menu may have either translucent or solid backgrounds. Set as preferred.
1.1.1.34 Boundary colour
The boundary or full screen and multi-0screen images may be set to off, black, dark grey,
light grey or white. Set as required.
1.1.27 Camera inputs
1.1.1.35 Termination
Specify here whether camera inputs should be terminated with 75ohms. Normally
30