Using the evc/epc with your pc, Evc/epc controller, With sae j1939 interface – High Country Tek epc, Electronic Pump Controller - A Multi-Function SAE J1939 Compatible Module User Manual
Page 9

023-00354-Rev1.6
evc/epc User Manual
9
Copyright © High Country Tek, Inc.
– 2013
evc/epc Controller
With SAE J1939 Interface
Using the evc/epc with your PC
Install the Graphical User Interface (GUI) on a host PC. Use the default file locations for easy future update. The
user has the option to choose file location.
Don’t run the GUI from a network as it needs access to certain files only in the Windows directories.
System Requirements
Windows XP, Vista or Windows7, 100MB or greater free disk space.
Insert the CD and follow the instructions. This will install the evc/epc GUI, manual and help files.
Install the Com Port driver. Locate the installation file by the following route:
Start
HCT Products
Digital Controllers
evc/epc
USB Serial Driver, CDMxxxxx_setup.exe
To insure a complete install, run the CDMxxxxx twice.
To launch evc Graphic User Interface, click Start
HCT Products
Digital Controllers
evc/epc. Choose “evc
Closed Loop” for closed loop applications, choose “evc v1.20” for open loop applications.