Evc/epc controller, With sae j1939 interface, Oem password – High Country Tek epc, Electronic Pump Controller - A Multi-Function SAE J1939 Compatible Module User Manual
Page 26

023-00354-Rev1.6
evc/epc User Manual
26
Copyright © High Country Tek, Inc.
– 2013
evc/epc Controller
With SAE J1939 Interface
Factory Settings (Only available with the OEM password)
Reset Unit
It restores the controller to the last
permanently saved configuration.
Serial Number
Specific for this unit, reference to the factory
record.
Start Date
The date when the evc/epc is connected to
the GUI for the first time.
OEM Password
When the GUI is purchased, the initial password is included. If lost, please contact HCT.
Users may change the OEM password.
The authorized user can change the factory password if required for security
This manual is related to the following products: