CDN DTTC-S - Combo Probe Thermometer, Timer & Clock - Silver EN - Manual

Perfect For
• Roasts & other meats
• Oven and barbecue
• Candy making & deep fry
Easy To Use
• Instant readout of internal food temperature
during cooking
• Alert sounds when set temperature is reached
• Sets upper or lower temperature limits
Features
• 6"/16.0 cm stainless steel probe
• 3'/91.4 cm sensor cable (heat resistant up to
600°F/316°C)
• Dual progress display
• Counts up & down
• Big digit
• Last count recall
• Clock
• International time
• ABS plastic case
• Sliding mode switch
• Temperature guide
• Adjustable stainless steel clip
• 2-way mounting: magnet/stand
• Battery and instructions included
Get Professional Results
Every Time!
Probe Thermometer
Perfect for roasting or grilling. Simply insert the
probe into the food. Place the food in the oven or
barbecue and close the oven door (or grill cover)
directly over the sensor cable. Set the temperature
alert for USDA safe cooking temperatures — listed
on the back of the case! Both the set and actual
temperatures are displayed during cooking.
For oven testing, the DTTC samples the variance of
internal temperatures and displays the maximum
and minimum temperatures reached. It’s also great
for alerting properly chilled temperatures.
Timer
Count up or down with this big digit timer. Timing
repetitive tasks is easy with the last count recall,
and avoid confusion with the distinct sound on
the timer alarm.
Clock
Choose from a 12-hour or 24-hour clock while
the running seconds provide easy reference for
short tasks.
Note: Remove sticker from display before use.
Note: In the following instructions, names of the control
buttons are shown in CAPS. Function information that appears
on the display is shown in BOLD CAPS.
Battery Installation
Replace battery when LCD becomes dim and weak or
alarm level declines.
1. Lift off the battery cover at the back of the unit.
2. Install 1.5V AAA battery observing polarity
shown in compartment.
3. Replace the battery cover until it clicks shut.
4.
LO will be displayed under THERMO when
the probe/sensor cable is disconnected or
malfunctions.
Model: DTTC
Combo Probe Thermometer,
Timer & Clock
14 to 392°F/-10 to +200°C
Counts 24 hours by minutes & seconds