CDN IN1022 - Infrared Gun EN - Manual

Perfect For
• Non-contact surface temperatures
Easy To Use
• 1-second response
• Laser target illumination
• Backlit
• Data-hold
• One-button operation
Features
• Shatterproof
• Memory
• Maximum, minimum, difference, average with lock
for continuous scanning
• High and low alerts
• Distance:spot = 12:1
• Battery status indication
• ABS plastic
• Auto-off
• Batteries and instructions included
Get Professional Results
Every Time!
Monitoring temperature is essential to keeping
food safe. The versatile IN1022 is perfect for any
application. Simply point the infrared sensor lens
toward the target and press the trigger to get a quick
reading of surface temperatures.
Maximum, Minimum, Difference
and Average Modes
The IN1022 also offers Maximum, Minimum,
Difference and Average modes. Maximum mode
displays the highest temperature among multiple
targets. Minimum mode displays the lowest
temperature among multiple targets. Difference
mode displays the difference between the maximum
and minimum temperature measurements of multiple
targets. While Average mode displays the average
temperature measurements of multiple targets.
Lock Mode
Lock mode continuously measures the temperature
for up to 60 minutes. This is particularly useful for
continuous temperature monitoring.
High and Low Alerts
The IN1022 provides a programmable high and low
alert for measurements that are out of the desired
range.
Note: Remove sticker from display before use.
Note: In the following instructions, names of the control
buttons are shown in CAPS. Function information that appears
on the display is shown in BOLD CAPS.
Battery Installation
Replace battery when LCD becomes dim or alarm
level declines. Power off the unit before installing
the batteries. A malfunction may occur if the power
is on when the battery is installed. If a malfunction
occurs, restart the device.
1. Remove battery cover by sliding it in the
direction of the arrow.
2. Install two 1.5V AAA batteries observing
polarity shown in compartment.
3. Replace the battery cover until it clicks shut.
Model: IN1022
Infrared Gun
-76 to +1022°F/-60 to +550°C