CDN DTP392 - Probe Thermometer EN User Manual
Probe thermometer, Perfect for, Easy to use
![background image](/manuals/409565/1/background.png)
Perfect For
•
Roasts & other meats
•
Candy making & deep fry
Easy To Use
•
Instant readout of internal food temperature
during cooking
•
Audio/visual alert sounds when set temperature
is reached
Features
•
5.5"/14 cm probe
•
3'/91 cm sensor cable
•
Shatterproof
•
Dual progress display
•
Big digit
•
Food-safe ABS plastic case
•
Stainless steel probe
•
Sliding mode switch
•
Temperature guide
•
2-way mounting: magnet/stand
•
Adjustable stainless steel clip
•
Battery and instructions included
Get Professional Results
Every Time!
Perfect for roasting or grilling. Simply insert the
probe into the food. Place the food in the oven or
barbecue and close the oven door (or grill cover)
directly over the sensor cable. Set the temperature
alert for USDA safe cooking temperatures.
Both the set and actual temperatures are displayed
during cooking.
Note:
Remove sticker from display before use.
Note:
In the following instructions, names of the control
buttons are shown in CAPS. Function information that appears
on the display is shown in
BOLD CAPS.
Battery Installation
Replace battery when LCD becomes dim or alert
level declines.
1. Remove battery cover on the back by sliding it
in the direction of the arrow.
2. Install one 1.5V AAA battery observing polarity
shown in compartment. A brief alarm sounds.
3. Replace the battery cover until it clicks shut.
4.
LO will be displayed under COOKING TEMP
when the probe/sensor cable is disconnected
or malfunctions.
Operating Instructions
A. Temperature Scale
Slide switch to °F or °C on the back of the case
to select temperature reading in Fahrenheit
or Celsius.
B. Temperature Alert
1. Slide alert switch on the left side of the case
to ON to turn the audio/visual alert on.
2. Insert the probe at least 1" (2.5 cm) into the
meat; making sure that it is not inserted into
a fatty deposit.
3. Gently close the oven door on the sensor cable
and insert the plug into the jack on the right
side of the case.
Model: DTP392
Probe Thermometer
32 to 392°F/0 to 200°C
����� ���������
������
�����
������
������� ������� �����������
����� ����� �����������
��
����
����
�����
�����
���� ����
�������
�������
���� ������