CDN IRTL220 - ProAccurate® Insta-Read® Beverage & Frothing Thermometer – 7” Stem EN - Manual

Perfect For
• Large frothing pitchers
Easy To Use
• 1.75"/4.4 cm magnified dial
• Target range indication
• Calibration tool on sheath
• Temperature and recalibration guides
• Adjustable stainless steel clip
Features
• NSF ® approved
• 7"/17.8 cm stem
• Waterproof
• Shatterproof
• Polycarbonate lens
• Stainless steel housing
• Recalibratable
• Sheath can be used as handle extension
• Pocket clip
Get Professional Results
Every Time!
• The IRTL220 measures the temperature of
beverages and frothed milk quickly and accurately.
• A computer-designed stainless steel clip holds
the thermometer stem snuggly against any
container. A positive lock, quick-release action,
permits the thermometer stem to be adjusted
to the desired height.
• When the clip is removed from the stem, this
INSTA-READ ® thermometer can be used for all
general purpose cooking needs.
• Temperature and recalibration guides are also
available at www.cdn-timeandtemp.com
Note: Clean the thermometer stem before each use.
Important: DO NOT LEAVE IN HOT OVEN OR
MICROWAVE.
Recalibration Guide
Immerse thermometer in sheath in at least
2 inches of ice (34°F) or boiling water (212°F at sea
level). Adjust hex nut beneath dial with calibration
tool on sheath to 34 or 212°F.
Adjustable Stainless Steel Clip
CAUTION: Always position the IRTL220 on the pitcher/pot
before filling it and/or applying heat.
Insert the stem through both holes
in the attachment clip. Press the top
portion of the clip together for easier
sliding up the thermometer stem.
Push the clip down onto the side of the
pot and position it until the stem tip
is just above the bottom.
Important: Keep stem away from direct heat of the cooktop
burner.
Model: IRTL220
ProAccurate ® Insta-Read ®
Beverage & Frothing Thermometer
7" Stem
0 to 220°F/-18 to +104°C
100
100
120
140
160
180
200
220
80
80
60
60
40
40
20
20
0
0
–10
10
30
50
70
90
�F
�C
IRTL220
Accepted for
commercial use