CDN DTF175 - TempFork™ Thermometer EN - Manual

Perfect For
• Thin cuts of meat, fish & poultry
• Picnics and outings
Easy To Use
• 7 preprogrammed & programmable
temperature settings
• Dual progress display
• Target range indication
Features
• Heat resistant construction
• Shatterproof
• Backlit
• Torch light
• Alert
• ABS plastic
• Stainless steel tines
• Auto-off after 5 minutes
• Plastic handle stays cool
• Holds 10 pounds
• Temperature guide on handle
• Loop for hanging
• Batteries and instructions included
Take the guesswork
out of food preparation and
ensure a properly cooked meal.
• Select preprogrammed temperature settings
• Backlit display for low light conditions
• Dual progress display shows current cooking and
target alert temperatures (130 to 175°F)
• Plastic handle stays cool
• Torch light illuminates food
• Heat resistant construction
• Stainless steel tines holds up to 10 pounds
Note: Remove sticker from display before use.
Note: In the following instructions, names of the control
buttons are shown in CAPS. Function information that appears
on the display is shown in BOLD CAPS.
Battery Installation
Replace battery when LCD or torch light become
dim or alert level declines.
1. Remove battery cover on the back of the handle
with a coin.
2. Install four 1.5V AAA batteries observing
polarity shown in compartment. A brief alert
sounds.
3. Replace the battery cover.
Operating Instructions
A. On/Off
1. Press any button or turn temperature selection
dial to turn on.
2. The DTF175 will automatically turn off after 5
minutes of inactivity.
B. Temperature Alert
The DTF175 has been preprogrammed to alert at
the following temperatures:
1) 130, 2) 140, 3) 145, 4) 150, 5) 155, 6) 165, and
7) 175.
1. Remove the plastic safety cap from the fork
tines.
2. Turn the fork ON
3. Turn the temperature selection dial to the
desired temperature setting. The set alert
temperature for that setting appears in the
lower portion of the display and the display
Model: DTF175
TempFork™ Thermometer
130 to 175ºF