Red Lion PAXLPV - Manual

1
z WIDE SPAN & OFFSET SCALING RANGE
z 3 1/2-DIGIT, 0.56" (14.2 mm) HIGH LED READOUT
z 24 VDC EXCITATION SUPPLY
z OVER-RANGE INDICATION
z SELECTABLE DECIMAL POINTS
z NEMA 4X/IP65 SEALED FRONT BEZEL
z OPTIONAL CUSTOM UNITS OVERLAY W/BACKLIGHT
z ±25 VOLT DC MAXIMUM INPUT
GENERAL DESCRIPTION
The premium features of the PAX Lite Series can now be applied to
measurement of process variables. With its high sensitivity and programmability,
the PAX Lite Process Volt Meter can be set up for a wide variety of applications.
In most plants the PAXLPV can be used for 90 to 95% of Process Volt meter
needs for readout of pressure, flow, temperature, level and other variables. The
meter has been specifically designed for harsh industrial environments. With
NEMA 4X/IP65 sealed bezel and extensive testing of noise effects to CE
requirements, the meter provides a tough yet reliable application solution. This
allows the PAXLPV to be used in dirty, hostile environments and in wash-down
areas. The 3½-digit bi-polar display (minus sign displayed when voltage is
negative) features 0.56" (14.2 mm) high, 7-segment LEDs for easy reading.
SAFETY SUMMARY
All safety related regulations, local codes and instructions that appear in the
literature or on equipment must be observed to ensure personal safety and to
prevent damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
MODEL PAXLPV - PAX LITE PROCESS VOLT METER
DIMENSIONS In inches (mm) Note: Recommended minimum clearance (behind the panel) for mounting clip installation is
2.1" (53.4) H x 5.0" (127) W.
Bulletin No. PAXLPV-D
Drawing No. LP0570
Released 9/08
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net
CAUTION: Risk of Danger.
Read complete instructions prior to
installation and operation of the unit.
CAUTION: Risk of electric shock.
C US LISTED US LISTED
UL
4
IND. CONT. EQ.
51EB