Vaisala WMT52 - Manual (Page 95)

Chapter 7 __________________________________________________ Getting the Data Messages
VAISALA_______________________________________________________________________ 93
Automatic Composite Data
Message (aR0)
When automatic composite data messaging is selected, the sensor sends
composite data messages at user configurable intervals. The message
structure is the same as with the composite data query command aR0
and contains a user configurable set of wind and supervisor data.
Example (the parameters included can be chosen from the full
parameter set of the commands aR1 and aR5):
$WIXDR,A,322,D,0,A,036,D,1,A,084,D,2,S,0.2,M,0,S,0.4,M,1,S,0.9,M,
2,C,21.0,C,2,U,12.0,N,0,U,12.5,V,1,U,3.514,V,2,G,Vaisala,,4*4D>
Example (only wind direction, speed averages, and heating
temperature included):
$WIXDR,A,037,D,1,S,0.3,M,1,C,21.2,C,2*7F
For selecting the parameter set in the response message, see Chapter 8,
Sensor and Data Message Settings, on page 95 .
Automatic composite data messaging is a concurrent, not an alternate
mode to either the polled or automatic modes.