General commands, Reset (axz), Command, see – Vaisala WMT52 User Manual
Page 64
User’s Guide ______________________________________________________________________
62 ___________________________________________________________________M210925EN-B
General Commands
In case the error messaging is disabled (see
), WMT52 does not return any response message with the general
commands given in ASCII and NMEA-formats.
Reset (aXZ)
This command is used to perform software reset on the device.
Command format in ASCII and NMEA 0183: aXZ
Command format in SDI-12: aXZ!
The response depends on the communication protocol, see the
examples.
Example (ASCII):
0XZ
0TX,Start-up
Example (SDI-12):
0XZ!0
Example (NMEA 0183):
0XZ
$WITXT,01,01,07,Start-up*29
where
a
=
Device address
XZ
=
Reset command
=
Command terminator in ASCII and NMEA 0183
!
=
Command terminator in SDI-12