Supervisor settings, Table 21, General unit settings – Vaisala WMT52 User Manual
Page 141
Appendix E ______________________________________________________ factory configurations
VAISALA______________________________________________________________________ 139
Supervisor Settings
0SF!0SF,t=19.8,b=17159,l=-50.0,m=4.0,h=10.0
Table 21
General Unit Settings
Field Character
Field Name
Description
t
Heat control calibration temp.
-50.0...+60.0 °C (calibrate to Ta)
b
Direct ADC value of temp.diode
0...4096
l
Defrosting limit w. 50% duty
cycle
-100.0 ...[m] °C (default -4.0 °C)
m
Heating limit w. full power
[l]...[h] °C(default 0.0 °C)
h
Heating limit w. 50% duty cycle
[m]...100.0 °C (default 4.0 °C)