Vaisala HMT310 - Manual (Page 36)

USER'S GUIDE____________________________________________________________________
36 __________________________________________________________________ M210619EN-D
Table 4 Entering Serial Parameters in Windows
®
2000 and
Windows NT
®
WINDOWS 2000 WINDOWS NT
MENU WHAT TO DO MENU WHAT TO DO
Start Start
 move the cursor to:  move the cursor to:
Programs Programs

move the cursor to:

move the cursor to:
Accessories Accessories

move the cursor to:

move the cursor to:
Communications

move the cursor to:
HyperTerminal click HyperTerminal

move the cursor to:

move the cursor to:
Hypertrm double click Hyperterminal click
 
Connection
Description
type the name of the
connection in the
appropriate field and
select an icon if
available; click OK.
Connection
Description
type the name of the
connection in the
appropriate field and
select an icon if
available; click OK.

Phone Number
move the cursor to the
field
CONNECT USING
and select 'direct to
COM x' (x = serial port
available); click OK
Connect to
move the cursor to the
field
CONNECT USING and
select 'COM x' (x =
serial port available);
click OK
 
COM x properties
select parameters
according to the
following figure; click
OK
COM x properties
select parameters
according to the
following figure, click
OK