Outback Power Systems GS Load Center Installation Manual - Manual (Page 11)

900-0123-01-00 Rev B 9
Planning
Tools Required
 Open-ended wrenches (9/16" and13 mm)
 Wire cutters/strippers
 Torque wrenches
 Assorted insulated screwdrivers
 Digital Voltmeter (DVM) or regular voltmeter
Materials Required
 Conductors for wiring
 Conduits
Location/Environmental Requirements
 Indoor mount only
Figure 7 Dimensions
8½" (21.6 cm) deep 16" (40.6 cm) wide
17"
(43.2 cm)
high
Side View Front View