Alcatel-Lucent OMNISWITCH 6800 - Manual (Page 68)

Backup Power Supply Components OmniSwitch 6800 Series Chassis and Hardware Components
page 2-42 OmniSwitch 6800 Series Hardware Users Guide June 2007
OS6800-BPS-225 225W Backup Power Supply
Up to eight OS6800-BPS-225 225 watt power supplies can be installed in the OS6800-BPS-SHLF power
shelf. Each OS6800-BPS-225 provides backup power for one OS6800-24 or OS6800-48 switch.
OS6800-BPS-225 Backup Power Supply
For information on installing a backup power supply module, refer to page 2-46 . For information on
removing a backup power supply, refer to page 2-48 .
Fan Status (Top LED).
Green when the power sup-
ply fans are operating under
normal conditions.
Solid amber when a fan
error is detected (e.g., one or
more fans quit unexpectedly.
Off when the power supply
is not operating.
Power OK (Bottom LED).
Displays solid green when
the power supply is operat-
ing normally.
Off when the power supply
is not operating.
Power
Supply
LEDs
Power Connector Socket.
Type IEC-320-C13. Supports
one 10 amp power cord.
It is recommended that you
use Alcatel-Lucent provided
power cords only.
Air Intake Vent.
The air intake vent provides
cooling and temperature control
for the power supply. Maintain
a front clearance of at least six
inches to ensure proper airflow.
DC Connector Socket.
Connector socket for attaching
the OS6800-BPS power supply
to the OS6800-24 or OS6800-48
switch chassis.