Alcatel-Lucent OMNISWITCH 6800 - Manual (Page 58)

Monitoring the Chassis OmniSwitch 6800 Series Chassis and Hardware Components
page 2-32 OmniSwitch 6800 Series Hardware Users Guide June 2007
Checking Fan Status
To check the current status for all six fans in the chassis, use the show fan command. For example:
-> show fan
Chassis Fan Status
-------+---+-----------
1 1 Running
1 2 Running
1 3 Running
1 4 Running
1 5 Running
1 6 Running
When the show fan command is issued for a stacked configuration, status information for all switches in
the stack displays. For a complete list of output definitions for this command, refer to the OmniSwitch CLI
Reference Guide.
Checking Power Supply Status
For information on checking power supplies for stand-alone and stacked OmniSwitch 6800 Series
switches, refer to
“Viewing Primary and Backup Power Supply Status” on page 2-53 .
Additional Monitoring Commands
CLI Commands Used for Monitoring a Chassis
show cmm Displays basic hardware and status information for primary and
secondary management modules (if applicable).
show ni Displays basic hardware and status information for individual modules.
If the switch is a stand-alone, information for the stand-alone switch
displays.
show module Displays basic information for individual modules. If the switch is a
stand-alone, information for the stand-alone switch displays.
show module long Displays detailed information for individual modules. If the switch is a
stand-alone, information for the stand-alone switch displays.
show module status Displays basic status information for individual modules. If the switch
is a stand-alone, information for the stand-alone switch displays.