GReddy TURBO KITS: Acura RSX Type-S 2002-03 / T517Z User Manual

Page 13

(5) Modify the drive shaft heat shield by

cutting the shaded area in the picture to
prevent the hose from rubbing up on the
shield.

• Reinstall the heat shield and make sure

there are enough clearance between the
hose and the shield and the drive shaft.

* Oil return hose to heat shield:

10mm

* Oil return hose to drive shaft:

20mm

Important!

With out this proper clearance, there is a
possibility of the return hose to fail and can
cause fire and damage the engine.

3-9

Compression Pipe Installation

(1) Install Compression pipe C-1 to the out-

let of the turbo using the provided
gasket and hardware.

(Parts used #6, 42, 63)

(2) Loosen the hose clamp on the Radiator

hose and rotate the hose so it comes up
slightly.