DAVIS DriveRight VMS Getting Started Guide (8180, 8185) User Manual
Page 5
Page 3
System Requirements
The software requires the following:
❏
486/25 (Pentium recommended) computer
running Windows 95; at least 10 MB free hard
disk space; one free serial port (COM1, 2, 3, or
4); mouse recommended.
❏
8 MB of Memory (16 MB recommended)
❏
VGA/SVGA Monitor (800 x 600 display recom-
mended)
C
ONNECTING
THE
D
RIVE
R
IGHT
TO
Y
OUR
PC
To communicate with the DriveRight, connect the DriveRight
to a serial port on your PC using the hardware and cables as
shown below.
You can connect either the DB9 or DB25 connector to any
free serial port. The hardware module may remain connected
to the PC permanently. To download data from the Drive-
Right, connect the free end of the connector cable to the
DriveRight device at the time of the download.
IBM Compatible
COM
Ports
DB9
(9-Pin)
DB25
(25-Pin)
Connection
Options
Serial Port
Connector
Cable
DriveRight
Hardware
Module
DriveRight
Connector
Cable
DriveRight