DAVIS DriveRight 500AL Manual (8155) - Manual (Page 33)

Page 29
You have the following option from the Year Entry Screen:
❏ Set the Year
Use PLUS and MINUS to set the Year.
M ISCELLANEOUS I NFORMATION
Accident Log
The Trip 500AL has room in memory for 5 “accident” logs
which show the vehicle‘s speed at each of the last 20 seconds
prior to a sudden deceleration. Information is written to the
“accident” log any time the vehicle exceeds the unit’s set
deceleration limit. The information in the accident log may be
downloaded, viewed, printed, and stored using the DriveRight
Vehicle Management Software.
NOTE: The unit always keeps the last 20 seconds of vehicle speed in
memory. This information may be viewed using the software
also.
Tamper Protection
The Trip 500AL will alert you if anyone attempts to tamper with
the unit, provided that you have entered a security code other
than 0000. If someone disconnects power from the unit, if an
incorrect code is entered five times, or if the unit is rebooted,
the word “TAMPER” appears on all screens and the time at
which the tamper attempt occurred is stored. The last 10
tamper times may be downloaded, viewed and printed, using
the DriveRight Vehicle Management Software.
To clear the flashing TAMPER segment, enter the correct secu-
rity code (see “Security Code Screen” on page 22). The tamper
indicator is also cleared after data is downloaded.
Tamper Indicator (Current Readings Screen)
NOTE: All data in the trip log is stored in “non-volatile” memory which
means that even if power is removed, this data will not be lost.
km/h
SPEED
ACCEL
G
DISTANCE
Km
CURRENT
Tamper Indicator Flashing
TAMPER
DAY.MO