DAVIS DriveRight 500AL Manual (8155) - Manual (Page 15)

Page 11
7. Press and release MODE until the Calibration screen
appears.
The distance travelled appears at the lower left of the dis-
play. Note that until you calibrate the Trip 500AL, this dis-
tance reading will be inaccurate. The speed reading and
calibration speed, which appear on the display as well, are
not necessary for this calibration procedure.
Calibration Screen
8. Press PLUS or MINUS until the distance reading matches
the trip meter on your vehicle.
Depending on how many miles you drove, you may need to
press PLUS or MINUS several times before the distance read-
ing changes.
NOTE: Pressing and holding PLUS/MINUS down increases the rate
at which the Trip 500AL adjusts the distance reading.
9. When finished calibrating, press and hold MODE until you
return to the data screen.
Press MODE to exit the calibration screen. All information
will be automatically saved.
Do not press and hold SET/
CLEAR in an effort to save the fine-tuned calibration! If you
press and hold SET/CLEAR, the unit completely resets the
calibration number.
km/h
MPH SPEED
DISTANCE
MILES
Km
SETTINGS
Speed Reading
Distance Reading Calibration Speed