DAVIS DriveRight 500AL Manual (8155) - Manual (Page 27)

Page 23
Current Readings screen and activates the
tamper indicator.
❏ Set or Change the Security Code
Use PLUS and MINUS to enter your current
code (if you are entering a security code for the
first time, make sure 0000 is entered). Press
and hold SET/CLEAR until the word CHG
(change) appears on the display.
Change Security Code
Use PLUS and MINUS to enter the desired
security code. When finished, press MODE to
save the new code and move to the Clear Log
Screen.
Clear Log Screen
The clear all log data screen allows you to perform a “total
clear” function which erases all data for every trip in your log
at once.
Clear Log Screen
CODE
SETTINGS
CLEAR LOG
SETTINGS