DAVIS DriveRight 500AL Manual (8155) - Manual (Page 28)

Page 24
You have the following option from the Clear Log Screen:
❏ Clear all Log Data
Press and hold SET/CLEAR. The word CLR
(clear) appears in the display to indicate that
the unit is preparing to clear all log data. To
protect against accidental clearing of data,
you must press and hold SET/CLEAR for 3
seconds before the unit clears data.
Preparing to Clear Log Data
Continue to hold SET/CLEAR until the unit
beeps and the word CLR disappears from the
display. This indicates that the unit is in the
process of clearing data. The unit beeps and
the word dONE appears in the display when
the unit finishes clearing data.
Unit Finished Clearing Data
CLEAR LOG
SETTINGS
CLEAR LOG
SETTINGS