DAVIS DriveRight 500AL Manual (8155) - Manual (Page 22)

Page 18
You have the following options from the Trip Speed and Dis-
tance Log Screen:
❏ Toggle Between Driver ID Code and Date
Display
You may display either the current Driver ID
code or the date. To toggle between the two,
press and release SET/CLEAR.
❏ Page Through Stored Trip Information
Press MINUS to page backward through
stored trip information. Press PLUS to page
forward through stored trip information.
Hold the button down to increase the speed
at which the Trip 500AL pages. When you
reach the first or last stored trip, the Trip
500AL will no longer page in that direction.
Trip Acceleration/Deceleration Log Screen
The Trip Acceleration/Deceleration Log Screen shows the
number of time the set acceleration and deceleration limits
were exceeded during each trip currently stored in the Trip
500AL’s memory. (Each time the limit is exceeded, 1 “count”
is recorded, regardless of the amount of time for which the
limit was exceeded.) To view trip acceleration/deceleration
information for a specific driver, enter that driver’s ID code
in the Driver ID Code Entry screen. To view all trip accelera-
tion/deceleration information for the vehicle, enter ID code
0000.
Trip Acceleration/Deceleration Log Screen
CODE
ACCEL COUNT DECEL COUNT
LOG
Driver ID (or Date)
Number of Times
Deceleration Limit
Exceeded During Trip
Number of Times
Acceleration Limit
Exceeded During Trip