DAVIS DriveRight 500AL Manual (8155) - Manual (Page 30)

Page 26
Limit and Unit Settings Screen
The Limit and Unit Settings screen allows you to set limits
for speed, acceleration, and deceleration. You may also
change the unit of measure in which speed and distance
information is displayed (km/h or MPH).
Limit Entry Screen
You have the following options from the Limit and Unit Set-
tings Screen:
❏ Enter/Change a Limit
Use SET/CLEAR to change the active digit
and use PLUS and MINUS to enter the
desired limit. for speed, acceleration, and
deceleration.
NOTE: The maximum limit settings are as follows:
Speed 255, Acceleration and Deceleration
2.55.
❏ Change the Unit of Measure
Press and release SET/CLEAR until the dis-
play segment (km/h or MPH) is flashing. Use
PLUS and MINUS to toggle between km/h
and MPH. Whatever segment is displayed
when you press MODE to exit this screen is
the unit of measure in which speed and dis-
tance information will be displayed.
km/h
ACCEL
G G
DECEL
SETTINGS
SPEED
Speed Limit
Deceleration Limit Acceleration Limit