DAVIS External Temperature Sensor with RJ Connector User Manual
Testing the sensor, Choosing a location for the sensor
Table of contents
Document Outline
- External Temperature Sensor with 25-Foot Cable
- Testing the Sensor
- 1. Attach the sensor cable to the appropriate connector on the Envoy or Temperature Station. Consult your Envoy or station manual for more information.
- 2. Press the appropriate key on your console as necessary to make sure you are getting an outside temperature reading on the console. Or, if not using a console, check the Envoy via software. The sensor will report as “inside temperature.”
- Choosing a Location for the Sensor
- Installing the Sensor
- Typical Installation with Envoy in Multi-Purpose Shelter
- Note: When running the sensor cable, try not to tug on the cable in such a way as to loosen the connections. Also, make sure the sensor cable is not so taut that the connection may loosen or pull free due to the strain. Many sensor problems occur bec...
- Note: Please do not return items to the factory for repair without prior authorization.