Contacting davis technical support – DAVIS External Temperature Sensor with RJ Connector User Manual
Page 4

FCC Part 15 Class B Registration Warning
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio commu-
nications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved in writing by Davis Instruments may void the user’s author-
ity to operate this equipment.
External Temperature Sensor with 25-Foot Cable Installation Manual
Document Part Number: 7395.248; Rev.B, January 3, 2011
Product Numbers: # 6475 and 6477
©2011 Davis Instruments Corp. All rights reserved.
Information in this manual is subject to change without notice.
This product complies with the essential protection requirements of the EC EMC Directive 2004/108/EC and
Low Voltage Directive 2006/95/EC. Davis Instruments Quality Management System is ISO 9001 certified.
3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A.
510-732-9229 • Fax: 510-732-9188
E-mail: [email protected] • www.davisnet.com
®
Contacting Davis Technical Support
If you are experiencing problems installing the sensor, first check all cable
connections. Connections should be firmly seated in the jacks and plugged in
straight. If you think a connection may be faulty, try jiggling the cable while
looking at the display. If a reading appears intermittently on the display, the
connection is faulty. If you are unable to solve the problem, please call Davis
Technical Support. We’ll be glad to help. Most questions can be answered over the
phone. You can also e-mail us for support or visit our web site. Sorry, we are
unable to accept collect calls.
Note:
Please do not return items to the factory for repair without prior authorization.
(510) 732-7814 — Monday - Friday, 7:00 a.m. - 5:30 p.m. Pacific Time. We are
unable to accept collect calls.
(510) 670-0589 — Technical Support Fax.
[email protected] — E-mail to Technical Support.
[email protected] — General e-mail.
www.davisnet.com — Davis Instruments web site. See the Weather Support
section for copies of user manuals, product specifications, application notes, and
information on software updates. Watch for FAQs and other updates.