DAVIS Vantage Pro2 Console - Manual (Page 25)

Selecting Units of Measure
22
Rain Rate
Press RAINYR to display the current rain rate. Rain Rate may be displayed
as either inches per hour (in/hr.) or millimeters per hour (mm/hr.). Rain Rate
will show zero and the umbrella icon does not appear until two tips of the
rain bucket within a 15–minute period.
Month–to–date precipitation
Press RAINYR again to select the month–to–date precipitation record. Monthly rain
displays the precipitation accumulated since the calendar month began. Month–to–date
precipitation is displayed in inches or millimeters (mm).
Year–to–date precipitation
Press RAINYR a third time to display the year–to–date precipitation record. Yearly rain
displays the precipitation accumulated since the 1st of the month you’ve chosen as the
beginning of your rain season in Setup Mode (See “Screen 13: Rain Season” on
page 16). Year–to–date precipitation is displayed in inches (in) or millimeters (mm).
Daily Rain
Press RAINDAY to display the rain accumulated since 12 midnight. Any
rain accumulated in the last 24 hours displays in the ticker at the bottom of
the screen.
Rain Storm
Rain Storm displays the rain total of the last rain event. It takes two tips of the rain
bucket to begin a storm event and 24 hours without rain to end a storm event.
Press RAINDAY to toggle between the daily rain total and the Rain Storm total. Rain
accumulation may be displayed as either millimeters (mm) or inches (in).
N
W
NE
SE SW
Vertical Scale: X10
WIND
RAIN YEAR
in
TEMP OUT
HUM IN
HUM OUT
DAILY RAIN
in
TEMP IN
hPa
BAROMETER
STATION NO.1
F
F
F
MPH
Last 24 hrs hr Every 1
S
E
NW
pm
HEAT INDEX
DAILY RAIN
in
RAIN RATE
in/hr
RAIN STORM
in
RAIN YEAR
in
RAIN MO
in
Daily Rain, Rain Storm, Rain Year, Rain Month, & Rain Rate
RAIN
YR
UV
RAIN
DAY