DAVIS Vantage Pro ISS Fan-Aspirated Add. 2003 & earlier - Manual (Page 3)

Tools for Installation Page 3
The hardware shown here is provided for assembly and mounting:
Additional Components on Vantage Pro Plus
Vantage Pro Plus includes an ultravio-
let (UV) sensor and a solar radiation
sensor. These two sensors are mounted
next to the rain collector on your ISS.
Note: Please make every effort when handling your
ISS not to touch the small white diffusers on
top of the UV and solar radiation sensors. Oil
from the skin will reduce their sensitivity. Clean
the diffusers using ethyl alcohol on a soft cloth
(NOT rubbing alcohol). The solar radiation
sensor may also be cleaned with soap and
water.
Tools for Installation
Refer to this section in your ISS Installation Manual.
Preparing the Anemometer
Refer to this section in your ISS Installation Manual.
1/4" Flat Washers
1/4" Lock Washers
1/4" Hex Nuts
U-Bolts
Nut Plate
.05"
Allen Wrench
1/4" x 3" Lag Screws
#4 x 1-1/8"
Machine Screw
#4 Tooth
Lock Washer
#4 Flat
Washer
#4-40
Hex Nut
UV and
Solar
Radiation
Sensors
Sensor
Mounting
Arms
Vantage Pro Plus ISS