beautypg.com

Final sensor positioning, Securing sensor cable – DAVIS Solar Radiation Sensor for GroWeather and EnviroMonitor User Manual

Page 9

background image

Standard and Industrial Versions: Installation

Page 9

8. If necessary, adjust the position of the sensor by tightening or loosening the levelling

screws.

When pointed directly at the sun, the shadows from the alignment fins
should appear as shown in the illustration below.

F

INAL

SENSOR

P

OSITIONING

9. Secure the sensor cable to the underside of the mounting arm using the 3/16" cable

clamp, #8-32 x 3/4" screw, #8 hex nut, and #8 flat washer as shown below.

S

ECURING

S

ENSOR

C

ABLE