DAVIS Solar Power Kit For Vantage Weather Stations and Envoy8X - Manual (Page 2)

2
Tools and Materials Needed for Installation
• Adjustable wrench or a 1/2'' and a 7/16'' wrench
• Flat blade screwdriver
• Phillips-head screwdriver
• Wire cutters or scissors
• Protractor (optional) - To adjust the solar panel to the correct tilt angle.
• Magnetic compass, local area map, or watch - To align the solar panel to
the south in the Northern Hemisphere (or north in the Southern Hemi-
sphere). The watch may be used to set the panel facing the sun at solar
noon.
Location Tips
The following tips should help you find the best possible location and position
for your Solar Power Kit. If necessary, you may have to reposition your station
to permit the solar panel sufficient access to the sun’s rays.
• The solar panel works best when the surface of the panel receives full sun-
light.
• Mount the panel away from fences, buildings, trees or other obstructions
that may cast shadows over the panel.
• The panel should be mounted facing south in the Northern Hemisphere and
north in the Southern Hemisphere for maximum sun exposure. 
Note: For information on mounting your console or Envoy in the shelter, refer to your shelter
manual.