Actron KAL9620A - Manual (Page 27)

9620 Professional OBD II Scan Tool 27
4.3.3 Memory Test
Perform the Memory Test if the scan tool has
trouble displaying code definitions or performing
functions that use internal memory. Select
Memory Test from the Tool Self-Test menu and
press the ENTER key.
The test begins immediately and displays a
message “Memory Test” followed by periods as
internal memory is tested.
When done, a message displays indicating
whether the test passed or failed. Press ENTER
to return to the Tool Self-Test menu.
4.3.4 Printer Test
If you cannot print from the scan tool, select
Printer Test and press the ENTER key. Refer to
section “Changing the Printer Settings“ on
page 20.
4.4 Technical Support
1-800-228-7667 (8:00 - 6:00 EST Monday - Friday). Be prepared to provide the scan
tool’s Software ID.
Memory TestPassed!
Press ENTER To Cont
Memory TestFailed
SW ID = F1E8
Press ENTER To Cont
Tool Self-Test|
1) Display Test
2) Keyboard Test[
`3) Memory Test
Memory Test . . . . .
. . . . . . .
Tool Self-Test|
2) Keyboard Test]
3) Memory Test
` 4) Printer Test