Telenav for Nextel Supported Devices: v3.6 for Motorola i710, i730, i733, i736, i830 User Manual

Page 20

PAGE 20 OF 33

Miss a turn?

Whenever you miss a turn, turn the wrong way, turn too early or too late, or otherwise get off the planned route to
your destination, TeleNav will automatically create a new route to your desired destination, audibly announce, “New
Route”, and give you a new set of instructions. If you realize you have gotten off the route, just keeping going.
TeleNav will detect your “departure” and calculate a new route to get you back on track.

Please note that it takes about 15 seconds for TeleNav to update your route. If during this process you also make
adjustments, TeleNav will probably have to contact its servers for another new route. Rerouting uses substantial
network bandwidth, so it is advisable for you to try to stay on the route. Since TeleNav GPS Navigation requires
the Nextel network, if you are off route and outside of Nextel coverage, you must return to Nextel coverage for GPS
Navigation to work again. In the mean time, press BACK to suspend its operation.

Biz Finder

If you select Biz finder, the first thing you must do is to help TeleNav determine where you want to look for the
business or point of interest. Once you have picked a point or an area, you can search topically by Category
name, or by entering the first few letters of the Business Name.

Search Point

You can search around where you are (Here), around an address you recently used
or entered (a recent stop), within a named city or ZIP code, around an airport, or
around a waypoint you previously marked. You can also enter a new address, and
search around it.

Selecting Here causes the GPS receiver to determine your current location as the
search point.

If you select A recent stop, you will get a list of recently used addresses, but may
need to use Refresh list to update the list with addresses recently entered using the
Voice Address Input System or the TeleNav web site. Once the list is updated, simply
highlight the address you want, and press OK.

Here
A recent stop
Within a city
Within a ZIP
New Address
Airport
Waypoint

Search point

OK BACK

If you select to search Within a city by name, you can either use one of the cities
you have used previously, or enter a new one. The state and city name entry
process is described below under Keypad Address Entry, but the entry process
ends before collecting the street name and number.