beautypg.com

Alliance Laundry Systems HX User Manual

Page 70

background image

68

9001900

Section 4 Service Procedures

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

21

Auxiliary 1

0:05

N/A

N/A

22

Auxiliary 2

0:05

N/A

N/A

23

Auxiliary 3

0:05

N/A

N/A

24

150°F Fill to
High Level

5:00

The water should reach 150°F and the
machine should fill to high level within 5
minutes and, when it does, a buzzer will
sound.

Refer to the “No Fill Analysis” flowchart.

25

Cold Fill to
Overflow

5:00

The machine should fill with cold water to
overflow within 5 minutes and, when it does,
a buzzer will sound.

Refer to the “Machine Did Not Fill Alarm
Analysis
” flowchart.

26

Soak (150°F)

2h00

The machine should maintain a water
temperature of 150°F and a high fill level for
the time programmed.

If the machine doesn’t maintain a water
temperature of 150°F, check the
components used for the auxiliary heating
(e.g. steam valve or heating elements). If
the machine doesn’t maintain a high fill
level, refer to the “Machine Did Not Fill
Alarm Analysis
” flowchart.

27

Drain 1

1:00

The machine should drain within 1 minute
and, when it does, a buzzer will sound.

Refer to the “Empty Alarm Analysis
flowchart.

28

Spin 1

2:00

The machine should spin at 500 RPM’s for 2
minutes.

Refer to the “No Spin Analysis” flowchart.

29

Spin 2

2:00

The machine should spin at 650 RPM’s for 2
minutes.

Refer to the “No Spin Analysis” flowchart.

30

Spin 3

2:00

The machine should spin at the following
RPM’s for 2 minutes:
• 18, 25, 35, 55, 75, 100 and 135-pound

capacity models: 800 RPM’s

• 165-pound capacity models: 750 RPM’s

Refer to the “No Spin Analysis” flowchart.

31

Spin 4

2:00

The machine should spin at the following
RPM’s for 2 minutes:
• 18, 25, 35, 55, and 75-pound capacity

models: 1000 RPM’s

• 100 and 135-pound capacity models: 800

RPM’s

• 165-pound capacity models: 750 RPM’s

Refer to the “No Spin Analysis” flowchart.

32

Auxiliary 3

0:15

N/A

N/A

33

Cold Fill to
Medium Level

5:00

The machine should fill with cold water to
medium level within 5 minutes and, when it
does, a buzzer will sound.

Refer to the “Machine Did Not Fill Alarm
Analysis
” flowchart.

34

Wash 1 10/3
(80°F)

0:15

The basket should rotate forward 10 seconds,
pause for 3 seconds, rotate in reverse for 10
seconds, pause for 3 seconds, etc.

Refer to the “No Motor Operation (With or
With No AC Drive Fault
” flowchart.

35

Drain 1

1:00

The machine should drain within 1 minute
and, when it does, a buzzer will sound.

Refer to the “Empty Alarm Analysis
flowchart.

Cycle 39 — Test Program

(continued)

Step

Description

Min:sec

Step Definition

Corrective Action

Table 1

(continued)

This manual is related to the following products: