PowerTap Joule 2.0 - Manual (Page 9)

Joule 2.0 User Guide page 9
CycleOps (ANT+) Heart Rate Strap
Wearing the heart rate strap, position it above torso as pictured. The
strap should rest just beneath the pectoralis muscles of the chest. For
best results slightly moisten the electrodes where contact is made with
skin. The heart rate strap must be worn to enable the heart rate function.
It should be snug enough to stay in place during the ride.
NOTE: Joule 2.0 is compatible with any ANT+ compatible heart rate strap.
The CycleOps heart rate strap contains a user replaceable CR2032 bat-
tery; with an expected life of three years, assuming one hour of use per
day. After replacing sensor battery, Joule must be re-paired to heart rate
sensor. See Sensor section on page 39.
Chapter 1: Starting Out
Band
Front of Heart Rate Strap
Back of Heart Rate Strap
Electrodes
Electrodes
Battery Door