PowerTap Joule 2.0 - Manual (Page 64)

Joule 2.0 User Guide page 64
Chapter 8: Setting Up User
Setting Up User Profi le
Setting up a user profi le is important for Joule 2.0 to display the most accurate information. A
user profi le can be set up and managed using PowerAgent software. Note: if using Joule 2.0 in
group environment, a USB stick will store user information.
1. Press and release the [MODE] button until Main mode is displayed.
2. Press [JOYSTICK] up/down to highlight Setup User. Press [JOYSTICK] in and
release to select Setup User.
3. Press [JOYSTICK] in and release to select Name. Press [JOYSTICK] up/down to
spell desired user name. Press [JOYSTICK] in and release to save changes.
4. Press [JOYSTICK] up/down to highlight Weight. Press [JOYSTICK] in and
release to select Weight. Use [JOYSTICK] to toggle appropriate user weight.
Calculations such as: watts/kg and accurate target slope resistance require cor-
rect user weight. Press [JOYSTICK] in and release to save changes.
5. Press [JOYSTICK] up/down to highlight Height. Press [JOYSTICK] in and
release to select Height. Use [JOYSTICK] to set appropriate user height. Press
[JOYSTICK] in and release to save changes.
6. Press [JOYSTICK] up/down to highlight Date of Birth. Press [JOYSTICK] in and
release to select Date of Birth. Use [JOYSTICK] to set appropriate date of birth.
Press [JOYSTICK] in and release to save changes.
Name: >
GEOFF
Weight (Pounds):
143
>
Height (Inches): >
070 >
Date of Birth: >
Aug 14 1980 >
Gender: >
>
Male
Power Zones >
HR Zones >
Back <
Report
Main
Setup User
FTP
00250