PowerTap Joule 2.0 - Manual (Page 59)

Joule 2.0 User Guide page 59
12. Press JOYSTICK up/down to highlight Power Smoothing. Press [JOYSTICK] in
and release to select Power Smoothing.
13. Press [JOYSTICK] up/down to change Power Smoothing from 1, 2,3,5,10,30.
Press [JOYSTICK] in and release to save settings. Note: Power smoothing 1
displays power data as it is sent from the power sensor, Power smoothing 30
displays power data as a 30 second rolling average which can be used for bet-
ter pacing during intervals and races. Press [JOYSTICK] in and release to save
changes.
14. Press [JOYSTICK] up/down to highlight Power With Zeros. Press [JOYSTICK]
in and release to select Power With Zeros.
13. Press [JOYSTICK] up/down to change Power With Zeros from Yes to No. Press
[JOYSTICK] in and release to save settings. Note: Power With Zeros set to Yes will
calculate all average power data with zeros included, Power With Zeros set to No
will calculate all average power data without zeros or only when pedaling. Press
[JOYSTICK] in and release to save changes.
15. Press [JOYSTICK] up/down to change Cadence Smoothing from 1,
2,3,5,10,30. Press [JOYSTICK] in and release to save settings. Note: Cadence
Smoothing 1 displays cadence data as it is sent from the cadence sensor, Ca-
dence Smoothing 30 displays cadence data as a 30 second rolling average which
can be used for better pacing during intervals and races. Press [JOYSTICK] in and
release to save changes.
16. Press [JOYSTICK] up/down to highlight Cadence With Zeros. Press [JOY-
STICK] in and release to select Cadence With Zeros.
17. Press [JOYSTICK] up/down to change Cadence With Zeros from Yes to No.
Press [JOYSTICK] in and release to save settings. Note: CadenceWith Zeros set
to Yes will calculate all average cadence data with zeros included, Cadence With
Zeros set to No will calculate all average cadence data without zeros or only
while pedaling. Press [JOYSTICK] in and release to save changes.
Chapter 7: Setting Up CycleOps Joule 2.0
Setting Up Display...continued
Backlight Level: >
2
Backlight Timeout:
Contrast:
5
>
Sleep Time: >
4 >
Dashboard: >
6 >
Power Smoothing:
1
Power with Zeros:
Yes
Cadence Smoothing:
Yes
Speed Smoothing:
>
1 >
Back <
Report
Main
Display
10
Speed with Zeros: >
No >
Language: >
English >
Units: >
English >