PowerTap Joule 3.0 - Manual (Page 8)

Joule 3.0 User Guide page 8
Chapter 1: Starting Out
2. Insert two screws and two knobs
through mount and handlebar.
Tighten securely. 3. Slide Joule 3.0 forward into
mount until it snaps into place.
Installing CycleOps Joule 3.0 on Indoor Cycle
Joule 3.0 should be installed with the indoor cycle mount if it is being used on an indoor cycle.
The indoor cycle mount allows Joule 3.0 to be tilted for optimum viewing angles.
1. Place mount onto the handle-
bars as shown. Note: release lever
should be closest to seat.