PowerTap Joule 3.0 - Manual (Page 10)

Joule 3.0 User Guide page 10
Chapter 1: Starting Out
2. Insert screw through bottom
of mount. 3. Insert two zip ties through bot-
tom of mount. Apply sticky pad and
tighten zip ties to secure mount. 1. Remove screw that holds
bottom of mount and rotate 90
degrees.
Installing CycleOps Joule 3.0 Using Standard Mount
For handlebar orientation, change the standard mount from the preassembled stem orientation.
4. Be sure to check Joule 3.0 is
secure in mount before riding.